Innovations

Adjustable Alto/Tenor SAX Backrest Flip up the Adjustable Alto/ Tenor SAX Backrest to change positions instantly, accommodating Alto and Tenor saxophones. The backrest allows for one-piece packing and is covered with Specially Formulated Foam.

Adjustable Baritone SAX Backrest Flip up the Adjustable Baritone SAX Backrest to adjust the height, then press it down to lock the backrest into place.

Swivel Legs Swivel Legs fit around other equipment on a crowded stage and fold up compactly.

All Grids Hanger Hanger fits different sized grid intervals from 75-110mm (3"-4.3") and also securely locks onto the wall.

All Slats Hanger Hanger fits different sized slat intervals from 60-90 (2.3"-3.5") and also securely locks onto the wall.

Auto Grab System The Auto Grab System is driven by the weight of the guitar or bass. When placed in the yoke, the housing slides down, rotating the arms to secure it. When you are ready to play, lift up and the AGS automatically releases! Guitar manufacturers employ differing types of finishes and finishing techniques. Please refer to your owner's manual for information regarding proper storage of your instrument.

Comfort Grip Grab the Comfort Grip and raise or lower the stand to the desired height. A locking pin prevents slipping and provides solid and stable support for even your heaviest instruments.

Folding Backrest The Folding Back Rest flips down to support your instrument. Angle it up to adjust the position of your instrument and fold it up all the way for packing and stowing.

Rotate-to-Stay Saddle The Rotate-to-Stay Saddle allows you to position your instruments any way you want: back to back, side by side, left or right facing. This is ideal for displaying instruments on stage, where space is limited, and for offering the best angle to show off your axes.

EZ-LOK The EZ-Lok is a unique design that allows quick and easy set up without troublesome locking screws or pins. As easy as 1, 2, 3... 1. Close the stand completely 2. Open to the lowest level 3. Raise to desired height.

EZ-LOK Tier The EZ-LOK Tier automatically locks at your required tilt angle. To pack, lift the tier to the highest level and then lower it down. Lift it up again to reset the required tilt angle.

Quik-N-EZ AutoLock System Simply lift up the stand arms and the Quik-N-EZ AutoLock System automatically sets the stand to your required height. Press on the levers to lower and to pack up.

Quik-N-EZ Gear Up The innovative Quik-N-EZ Gear Up allows just one person to easily raise and lower speakers or lights thanks to a revolutionary system that drives two posts simultaneously. Turn the handle clockwise for fast and effortless loading, and counterclockwise for lowering. A hand knob ensures a tight fit of the tubes.

2-in-1 Boom Clamp The Quik-N-EZ 2-in-1 Boom Clamp simultaneously adjusts the length and angle of the boom. Loosen the knob a half turn to set it and then tighten a half turn back to secure it.

EZ Glide Just pull up or down for instant height adjustments. The innovative EZ Glide's inner mechanism automatically locks the stand at the desired height.

HERCULES H Base The metal HERCULES H Base is weighted for maximum stability and dampens any vibrations that might otherwise be transmitted through the stage or floor.

Mic Clip The Quik-N-EZ Mic Clip mounts with a flip of the lever and is rubber-lined for a secure Grip. Fits all mic stands without top washers and accepts mic sizes: 20-35mm.

Quik-N-EZ Adaptor Simply push the lever up or down to quickly mount the Quik-N-EZ Adaptor to the mic stand. It can be left attached to the mic clip for speedy setups.

Quik-N-EZ Boom RetainerQuik-N-EZ Boom Retainer The Quik-N-EZ Boom tilts easily and slides smoothly to reach where you need it. The Quik-N-EZ Retainer allows for instant attachment of the boom to the stand. Just flip the lever up to attach and down to remove.

Quik-N-EZ Height Adjustment Grip The Quik-N-EZ Height Adjustment Grip adjusts the stand up or down to the desired height with smooth one-handed operation. A secure internal locking mechanism prevents slipping.

Quik-N-EZ Height Adjustment Lever With the Quik-N-EZ Height Adjustment Lever, the stand slides up and automatically stays in position. To lower, simply press the EZ lever.

Reset Wing If you need to adjust the tightness of the EZ Glide, push the upper shaft all the way down until the yellow reset wing appears at the base. Twist the screw clockwise to loosen and counter-clockwise to tighten.

Tilting Base and Swivel Legs Tilting Base with Swivel Legs give you a fully adjustable stand angle and swiveling legs that fit around other stands, drums and stage equipment. Perfect for tight spaces and difficult to reach spots.

EZ Glide Just pull up or down for instant height adjustments. The innovative EZ Glide's inner mechanism automatically locks the stand at the desired height.

Quik-N-EZ Height Adjustment Grip The Quik-N-EZ Height Adjustment Grip adjusts the stand up or down to the desired height with smooth one-handed operation. A secure internal locking mechanism prevents slipping.

Quik-N-EZ Height Adjustment Lever With the Quik-N-EZ Height Adjustment Lever, the stand slides up and automatically stays in position. To lower, simply press the EZ lever.

Quik-N-EZ Retainer The Quik-N-EZ Retainer allows for instant attachment of the boom to the stand. Just flip the lever up to attach and down to remove.

Reset Wing If you need to adjust the tightness of the EZ Glide, push the upper shaft all the way down until the yellow reset wing appears at the base. Twist the screw clockwise to loosen and counter-clockwise to tighten.

Tilting Base and Level Legs The Tilting Base lets the stand angle from 90 to 75 degress, reaching more positions. Swivel Legs fit around other equipment, perfect for crowded stages. Simply pull up on the locking ring for compact packing.

Quik-N-EZ AutoLock The Quik-N-EZ AutoLock height adjustment is designed to stop speakers from sliding back down when raised up to height. For extra security when loaded, a safety pin insures the knob stays in the lock position.

Quik-N-EZ Gear Up The innovative Quik-N-EZ Gear Up allows just one person to easily raise and lower speakers or lights thanks to a revolutionary system that drives two posts simultaneously. Turn the handle clockwise for fast and effortless loading, and counterclockwise for lowering. A hand knob ensures a tight fit of the tubes.